二次通用旋转组合设计法优化八角油树脂微胶囊化工艺Optimizing anise oil resin microencapsulation technology with second general orthogonal rotation design method
王琴,蒋林,温其标,白卫东
摘要(Abstract)：
采用二次通用旋转组合设计法优化八角油树脂微胶囊化工艺条件,探讨了麦芽糊精、大豆蛋白、八角油树脂、喷雾干燥进风温度等条件对微胶囊的产率和包埋率的影响。结果表明:麦芽糊精20%、大豆蛋白7.5%、八角油树脂5%、喷雾干燥进风温度180℃。此条件所得微胶囊化八角油树脂,气味纯正,呈浅黄色,颗粒细腻,均匀,溶解时间58 s,水分含量2.53%,包埋率为96.7%,微胶囊化效率高达97.3%。
关键词(KeyWords)： 八角油树脂;微胶囊;二次通用旋转组合设计
基金项目(Foundation): 广西科技攻关项目(桂科攻0424008-1C)
作者(Author): 王琴,蒋林,温其标,白卫东
参考文献(References)：
- [1]杜玉宝,焦利勇,王晓敏,等.柠檬油香精微胶囊的研制[J].大连轻工业学报,2004,23(3):183-185.
- [2]葛毅强.天然维生素E微胶囊技术的研究[J].中国油脂,2000,25(3):37-40.
- [3]向云峰.辣椒油树脂微胶囊化的研究[J].食品科学,1997(11):27-30.
- [4]梁治齐.微胶囊技术及其应用[M].北京:中国轻工业出版社,2001.
- [5]王璐,肖刚,许时婴.微胶囊化薄荷油缓释性能的测定[J].食品与发酵工业,2000,26(2):28-32.
- [6]Benoit Baras.Vaccine properties of antigens entrappedinmicroparticles produced by spray-drying technique and usingvariouspolyester polymers[J].Vaccine,2000,18(15):1495-1505.
- [7]A Lamprecht C MLehr.Influences of process parameters onpreparation of microparticle used as a carrier systemfor z-3unsaturated fatty acid ethyl esters used in supplementarynutrition[J].Journal of Microencapsulation,2001,18(3):347-357.
- [8]Aileen King,Stellan Sandier,Arne Andersson.The effectof host factors and capsule composition on the cellular overg-rowthoni mplantedalginatecapsules[J].Journal of biomedi-cal materials research,2001,57(3):374-383.
- [9]Hidefumi Yoshii,Apinan,Soottitantawat,et al.Flavorre-lease fromspray-dried maltodextrin/gumarabic or soymatrices as a function of storage relative Humidity[J].Innovative Food Science&Emerging Technologies,2001,2(1):55-61.
- [10]黄秀娟.微胶囊化油脂的生产技术[J].粮油食品科技,2006,14(3):17-19.
- [11]黄英雄,孙红明,华聘聘.微胶囊化粉末油脂制品表面油测定方法的研究[J].中国油脂,2002,27(4):61-63.